Criterion D250RL Reinforcing Mesh
Full Description
D250RL Reinforcing Mesh
Standard: AS/NZS 4671:2019 — Steel reinforcing materials Designation: D250RL Product Form: Welded steel mesh (fabric)
Product Description
D250RL is a deformed ribbed welded steel mesh with a specified lower characteristic yield stress of 250 MPa, Rectangle bar configuration, and Low ductility class.
| Designation Component | Code | Meaning |
|---|---|---|
| Profile | D | Deformed ribbed |
| Strength Grade | 250 | 250 MPa |
| Configuration | R | Rectangle |
| Ductility Class | L | Low |
Orthogonal bars in a rectangular configuration.
Size and Spacing
Unlike bar and coil, mesh designations include bar size and spacing as suffixes — e.g. D250RL92 means 9 mm bar diameter, 200 mm spacing. However, ACRS certifies at the grade level (D250RL): the specific sizes and spacings a firm is certified for are listed on the ACRS certificate and recorded in LTQ data.
Certification Scope
ACRS certification for D250RL mesh confirms that the certified firm's fabrication meets the requirements of AS/NZS 4671:2019 for this grade, including mechanical properties of the parent wire/bar, weld shear strength, dimensional tolerances, and marking requirements.
Applicable Clauses (AS/NZS 4671:2019)
| Clause | Subject |
|---|---|
| §5.4 | Designation of welded mesh |
| §7 | Mechanical properties |
| §8 | Dimensional properties |
| §9 | Weld shear force |
| §10 | Marking |
Certificate Types
| Certificate | Stage | Description |
|---|---|---|
| Non-Producer Certificate | Stage 2 — Fabricating | Firms fabricating D250RL mesh from certified reinforcing materials made by a Producer |
Profiles using this criterion
ACRS Product Certification
- Concrete Reinforcing Steels | 1.0.0
Conformity Alignment
Certified
Pass Yes
Definition "All AS/NZS 4671 requirements met for D250RL grade"
Non Producer
Pass No
Definition "Non-Producer Certificate active; requirements met for processing/fabricating"
Voluntary Relinquishment
Pass No
Definition "Certificate voluntarily relinquished by the firm"
Site Closed
Pass No
Definition "Certified site permanently closed; certificate no longer valid"
Terminated Non Compliance
Pass No
Definition "Certificate terminated by ACRS due to non-compliance"
Change Log
1.0.0 (2026-04-09)
Initial release.